1. The incinerator shall have the following features and facilities:-

a-    Fuel oil grade No. 2 (diesel oil) fired burners 220V, 50 Hz, single phase 4 wire electricity supply electric

motors insulated to Class “F” suitable for operation at 50?C ambient temperature.

b-    The incinerator to be fully assembled wired and logic function tested in the factory, prior to dispatch.

c-    One high flue gas temperature indicator/alarm to provide an audio/visual warning in the event of high flue gas

temperatures occurring in two stages:-

d-    First stage audible alarm, second stage incinerator shutdown, with one voltage free contact for connection to a

remote alarm system.

e-    Flexible wire control linkages to bring under fire air, overfire air and burner slide plate control to front of

incinerator.

f-    One fire protection system, comprising fusible links over burners, deadweight fire valve, electrically

interlocked with incinerator controls.

g-    Special feeding door with thermal lock to protect the operator from accident.

h-    One set of cleaning tools.

i-     Two sets of comprehensive written instructions.

1. The incinerator shall consist of a low temperature carbonizing changer (primary chamber) in which the waste

components are converted into gas by heat which is produced through incomplete combustion as the result of a deficiency

of air, and a gas reactor (thermal reactor) in which the gas is burned with a controlled excess of air.

1. The incinerator shall be equipped with water injection nozzle connection. If the temperature in the primary

chamber should rise too high (normal temperature between 300 and 800?C) during the operating time, the automatic water

injection shall be activated to decease the temperature.

1. The incinerator shall have the following features and facilities:-

–      Fuel oil grade No. 2 (diesel oil) fired burners 220V, 50 Hz, single phase 4 wire electricity supply electric

motors insulated to Class “F” suitable for operation at 50?C ambient temperature.