10)Where applicable the following shall apply:

1. a) Electrical Safety
2. i) The unit should be provided with a line (power) cord of acceptable durability, quality, length, and ampacity

and should be secured with adequate strain reliefs.

1. ii) The unit should include, or the bidder or supplier should offer, power plugs that are sufficient for the maximum

voltage and current of the unit.

iii) The chassis should be grounded and grounding resistance should not exceed 0.15 ohm.

1. iv) If the unit is double insulated, it should be so labeled.
2. v) Electrical leakage current from the chassis of the unit should not exceed

500μA per IEC 601-1 b)  Effects of Fluids