 Should be capable to shred up to 100 liters of the treated waste.

7

 The technology should be capable to treat hospital waste including sharps like needles,

lancets, scalpels and soft materials like bandages.

 Must render the waste to be unrecognizable.

Following accompanying documents must be supplied with the treatment system and shall

be available at the Site:

1. Operation instructions (including process description.
2. Loading and maintenance procedures.
3. Short-form of operation and loading procedures.
4. ASTM International (ASTM):

C401 91 (2005) Standard Classification of Alumina and Alumina-Silicate Castable Refractories

C612 04       Mineral Fiber Block and Board Thermal Insulation

1. National Fire Protection Association (NFPA):

70 07     National Electrical Code

82 04     Incinerators and Waste and Linen Handling Systems and Equipment

1. Underwriters Laboratories (UL):

50 07…  Enclosures for Electrical Equipment

PART 2 PRODUCT

2.1  INCINERATOR INSTALLATION

1. The incinerator shall consist of a low temperature carbonizing changer (primary chamber) in which the waste

components are converted into gas by heat which is produced through incomplete combustion as the result of a deficiency

of air, and a gas reactor (thermal reactor) in which the gas is burned with a controlled excess of air.